Changing network settings can have unintended side effects. Please speak with your network administrator before implementing any advice in this guide. Please note , Jet Interactive Team cannot make any changes on your Network or router.
SIP ALG is a setting found in many commercial and residential firewalls and routers. It is a feature that is designed to improve the performance of VoIP applications. However, in reality, it usually causes more problems than it solves.
Common Symptoms of SIP ALG
Some of the most common symptoms of SIP ALG are listed below:
-
One-way or No-way audio, this can be intermittent or consistent.
-
Outbound or inbound calls fail to connect.
-
Call transfers fail.
-
Audio cuts out completely while on a call and doesn't return.
-
Phones continue to ring and cannot be answered.
-
The inability to call another extension on the network.
-
Busy Lamp Field keys acting slow or not working at all.
How to turn off SIP ALG
While the symptoms of SIP ALG can be easy to detect, it may not always be easy to turn off. This is due to the location of these settings and how they differ from each manufacturer. Instructions for disabling SIP ALG on common routers are listed below :
Huawei HG659
-
Logon to the Huawei HG659 Web interface using your favourite web browser. By default this should be http://192.168.1.1
-
Enter the administration username and password for your router provided by your Internet provider. By default, the username is user and password is HuaweiUser.
-
Once you have logged into the router, in the top menu click "Internet" then in the left hand menu click on "Forwarding".
-
Expand the "ALG" menu and from there ensure that "Enable SIP ALG" is un-ticked and then click on "Save".
-
If needed, you can also change the firewall level to low (from a choice of off, low, or high)
-
In the top menu, click on "Internet" then "Network Security"
-
Under Firewall, change the security level to "low"
-
Click on "Save"
-
In the top menu, click on "Internet" then "Network Security"
TP-Link Archer VR1600v
-
Using your favourite web browser navigate to 192.168.1.1 (the default IP address for the router) the default username and password is admin. If this is in default mode it will require you to set up a new access password.
-
In the top menu select the "Advanced tab", then "NAT Forwarding" on the left hand menu
-
Select "ALG"
-
Uncheck "SIP ALG" to disable this feature
-
Click on "Save"
If your Router is none of the above, please contact your ISP to make this change for you.
Comments
0 comments
Please sign in to leave a comment.